Section 33 Reliability-centred maintenance
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 12 Recognised Codes and Standards for the Classification of Offshore Units - Chapter 1 Recognised Codes and Standards - Section 33 Reliability-centred maintenance

Section 33 Reliability-centred maintenance

Parent topic: Chapter 1 Recognised Codes and Standards

33.1 Recognised codes and standards for reliability centred maintenance

33.1.1 The following codes and standards are recognised by LR:
  • API RP 17N Subsea Production System Reliability and Technical Risk Management
  • BS EN ISO 20815 Petroleum and natural gas industries – Production assurance and reliability management
  • IEC 60300–3-11 Dependability management – Part 3-11: Application guide – Reliability centred maintenance
  • IEC 61078 Reliability block diagrams
  • ISO 14224 Petroleum, petrochemical and natural gas industries – Collection and exchange of reliability and maintenance data for equipment
  • ISO/TR 12489 Petroleum, petrochemical and natural gas industries – Reliability modelling and calculation of safety systems
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.