3 Definitions
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.209(63) – 2012 Guidelines on Design and Construction to Facilitate Sediment Control on Ships (G12) – (Adopted on 2 March 2012) - Annex – 2012 Guidelines on Design and Construction to Facilitate Sediment Control on Ships (G12) - 3 Definitions

3 Definitions

  3.1 For the purposes of these Guidelines, the definitions in the International Convention for the Control and Management of Ships' Ballast Water and Sediments, 2004 (the Convention) apply.

  3.2 Ballast water tank – For the purposes of these Guidelines, a ballast water tank is any tank, hold or space used for the carriage of ballast water as defined in Article 1 of the Convention.

Parent topic: Annex – 2012 Guidelines on Design and Construction to Facilitate Sediment Control on Ships (G12)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.