Section 4 Diesel alternator sets
Clasification Society 2024 - Version 9.40
Clasifications Register Guidance Information - Ship Vibration and Noise Guidance Notes - Chapter 7 Machinery vibration - Section 4 Diesel alternator sets

Section 4 Diesel alternator sets

4.1 The assessment criteria apply to both rigidly mounted and resiliently mounted sets.

4.2 Vibration levels on alternators driven by reciprocating internal combustion engine should be assessed using Table 7.5.1 Vibration of AC generating sets driven by reciprocating internal combustion engines which have been reproduced from ISO 8528 Part 9 table C.1.

4.3  Alternator Assessment

  • <value 1. Damage not expected with standard designs if vibration less than this level.
  • >value 1, >value 2. Assessment of structure and components may be required, along with an agreement between manufacturer and component supplier to ensure reliable operation.
  • >value 2. Special designs of structure and components required.

4.4  Engine assessment

In general, engine vibration levels which lie within the “Recommended” area of Figure 7.3.2 Reciprocating machinery will also comply with the Value 1 of ISO 8528 Part 9.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.