1.1 The EGC equipment to be used in the GMDSS
should comply with the general requirements set out in the annex to
Assembly resolution A.694(17); relevant
IEC standards (IEC 61097-4 and IEC 60945) and the following minimum
performance requirements.
1.2 The equipment should be capable of producing
a printed copy of received information. Received EGC messages may
be stored for later printing with an indication to the operator that
the message has been received, except for the vital messages referred
to in paragraph 3.2 which should be printed out upon receipt.
1.3 Alternatively to the requirement in paragraph 1.2, the
equipment need not provide means to produce a printed copy of received information if it
is installed in combination with an interface connecting it to navigation equipment that
is compliant with resolution MSC
252(83), as amended, on Revised Performance standards for integrated
navigation systems. Provisions for interconnection to a shipborne integrated
radiocommunication system (IRCS) when used in the GMDSS (resolution A.811(19)) should also be included.
1.4 The EGC installation may be either separate or combined
with other installations.footnote