Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part
12 Recognised Codes and Standards for the Classification of Offshore Units - Chapter 1 Recognised Codes and Standards - Section
14 Drilling equipment
|
Section
14 Drilling equipment
14.1 Recognised codes and standards for drilling equipment
14.1.1 The following codes and standards are recognised by LR:
- API Spec. 4F Drilling and Well Servicing Structures
- API RP 7G Drill Stem Design and Operating Limits
- API Spec. 7-1/ISO 10424-1 Rotary Drill Stem Elements
- API Spec. 7K Drilling and Well Servicing Equipment
- API Spec. 8A – Drilling & Production Hoisting Equipment
- API RP 8B Procedures for Inspection, Maintenance, Repair and
Remanufacture of Hoisting Equipment
- API RP 9B Application, Care and Use of Wire Rope for Oil Field Service
- API Spec. 8C Drilling and Production Hoisting Equipment (PSL 1
and PSL 2)
- API Spec. 9A Wire Rope
- API Spec. 11D1/ISO 14310 Packers and Bridge Plugs
- API Spec. 16A/ISO 13533 Drill-Through Equipment
- ISO 10405 Petroleum and natural gas industries – Care and use
of casing and tubing
- ISO 10407-1 Petroleum and natural gas industries – Rotary
drilling equipment – Part 1: Drill stem design and operating limits
- ISO 10414 series Petroleum and natural gas industries – Field testing of
drilling fluids
- ISO 10426-1 Petroleum and natural gas industries – Cements and
materials for well cementing – Part 1: Specification
- ISO 10427 series Petroleum and natural gas industries – Equipment for well
cementing
- ISO 11960 Petroleum and natural gas industries – Steel drill
pipe
- ISO 11961 Petroleum and natural gas industries – Steel pipes
for use as drill pipe – Specification
- ISO 13500 Petroleum and natural gas industries – Drilling fluid
materials – Specifications and tests
- ISO 13624 series Petroleum and natural gas industries – Drilling and
production equipment
- ISO 13625 Petroleum and natural gas industries – Drilling and
production equipment – Marine drilling riser couplings
- ISO 13678 Petroleum and natural gas industries – Evaluation and
testing of thread compounds for use with casing, tubing and line pipe and
drill stem elements
- ISO 13680 Petroleum and natural gas industries –
Corrosion-resistant alloy seamless tubes for use as casing, tubing and
coupling stock – Technical delivery conditions
- ISO 14693 Petroleum and natural gas industries – Drilling and
well-servicing equipment
- ISO 15463 Petroleum and natural gas industries – Field inspection of new
casing, tubing and plain-end drill pipe
- ISO 17348 Petroleum and natural gas industries – Materials
selection for high content CO2 for casing, tubing and downhole
equipment.
- FEM Section 1 - Heavy Lifting and Handling Equipment. FEM
1.001 Rules for the Design of Hoisting Appliances, Booklets 1 to 8
|
|
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime
and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective
officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications
Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance
on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant
Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is
exclusively on the terms and conditions set out in that contract.
|
![](LR-FooterLogo.png) |
|