7.6 NOx mode
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code - Technical Code on Control of Emission of Nitrous Oxides from Marine Diesel Engines - Appendix 4 - Calibration of the analytical instruments - 7 Efficiency test of the NOx converter - 7.6 NOx mode

7.6 NOx mode

 The NO analyser shall then be switched to the NOx mode so that the gas mixture (consisting of NO, NO2, O2 and N2 ) now passes through the converter. The indicated concentration (a) shall be recorded (the analyser must be in the NOx mode).

Parent topic: 7 Efficiency test of the NOx converter
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.