2 Design
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.647 – Guidelines to Minimize Leakages from Flammable Liquid Systems – (Adopted on 6 June 1994) - Annex - Guidelines to Minimize Leakages from Flammable Liquid Systems - Appendix 6 - Filters and Strainers - 2 Design

2 Design

 All pressure retaining parts should be suitable for the maximum operating temperature and pressures. The filter or strainer design and construction should facilitate cleaning and prevent or minimize spillage during maintenance. Filters and strainers should be designed such that they cannot be opened when under pressure.

Parent topic: Appendix 6 - Filters and Strainers
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.