4.2 Facility instrumentation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1195 – Guidelines for the Conduct of High-speed Craft Model Tests – (2 June 2006) - Annex - Guidelines for Model Testing - 4 Instrumentation, Calibration and Data Recording - 4.2 Facility instrumentation

4.2 Facility instrumentation

 The following instrumentation should be provided in the model basin:

  • .1 one static wave height probe located clear of tank end effects;

  • .2 one moving wave height probe mounted so that it approximately matches the mean model position;

  • .3 mean forward speed of the model;

  • .4 video camera(s) to monitor the interior of the vehicle spaces; and

  • .5 video camera(s) to monitor the exterior of the model, especially the bow aperture.

Parent topic: 4 Instrumentation, Calibration and Data Recording
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.