Part 3 – Documentation Of Approval
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.205(62) – 2011 Guidelines and Specifications for Add-On Equipment for Upgrading Resolution MEPC.60(33)–Compliant Oil Filtering Equipment – (Adopted on 15 July 2011) - Annex – 2011 Guidelines and Specifications for Add-on Equipment for Upgrading Resolution MEPC.60(33)-Compliant Oil Filtering Equipment - Annex – Test and Performance Specifications for Type Approval of Add-on Equipment for Upgrading Resolution MEPC.60(33)-Compliant Oil Filtering Equipment - Part 3 – Documentation Of Approval

Part 3 – Documentation Of Approval

  5.1 Satisfactory compliance with all the test requirements enumerated in part 1 or 2 of this annex should be shown in the certificate of type approval issued by the Administration in the format specified in paragraph 5.2 below. An Administration may issue a certificate of type approval based on separate testing or on testing already carried out under supervision by another Administration.

  5.2 A certificate of type approval should be in the format shown in the appendix to this annex. The Certificate should identify the type and model of the add-on equipment to which it applies and identify equipment assembly drawings, duly dated. Each drawing should bear the model specification numbers or equivalent identification details. The certificate should include the full performance test protocol on which it is based. If a certificate of type approval is issued by an Administration based on a certificate previously issued by another Administration, the certificate should identify the Administration which conducted the test on add-on equipment and a copy of the original test results should be attached to it.

Parent topic: Annex – Test and Performance Specifications for Type Approval of Add-on Equipment for Upgrading Resolution MEPC.60(33)-Compliant Oil Filtering Equipment

Appendix 1

BADGE
OR
CIPHER 		   
Certificate of type approval for add-on equipment
  Name of Administration
     
This is to certify that the add-on equipment listed below has been examined and tested in accordance with the requirements of the specifications of the annex to the 2011 Guidelines contained in resolution MEPC.205(62). This certificate is valid only for add-on equipment referred to below.
     
Add-on equipment supplied by
..................................................................................................................................................
Under type and model designation ............................................................................................
and incorporating:
  footnoteAdd-on equipment manufactured by ..........................................................................
  to specification/assembly drawing No ................................................................. date
  footnoteCoalescer/Absorbent/Membrane/Filter manufactured by ............................................
  to specification/assembly drawing No .........................................................................
  footnoteControl equipment manufactured by ..........................................................................
  to specification/assembly drawing No ................................................................. date
  footnoteOther means ...............................................................................................................
  to specification/assembly drawing No .........................................................................
     
footnoteFor installation on oil filtering equipment supplied by
..................................................................................................................................................
Under type and model designation ............................................................................................
     
Maximum throughput of system ……… m3/h ___
     
Limiting conditions imposed ................................
Test date and results attached in the appendix.
     
Official stamp Signed ..................................................................
    Administration of ..................................................
    Date this .......... day of .............................. 20 .....

Appendix 2 – Test Data and Results of Tests Conducted on Add-on Equipment in Accordance with Part 1 or 2 of the Annex to the 2011 Guidelines Contained in Resolution MEPC.205(62)

Add-on equipment submitted by
..................................................................................................................................................
Test location ..............................................................................................................................
     
Method of sample analysis ........................................................................................................
..................................................................................................................................................
..................................................................................................................................................
..................................................................................................................................................
     
Samples analysed by ................................................................................................................
     
Environmental testing of the electrical and electronic sections of the add-on equipment has been carried out in accordance with part 3 of the annex to the 2011 Guidelines contained in resolution MEPC.205(62). The equipment functioned satisfactorily on completion of each test specified on the environmental test protocol.
..................................................................................................................................................
..................................................................................................................................................
..................................................................................................................................................
..................................................................................................................................................
     
Test fluid .C.    
  Surfactant – documentary evidencefootnote
  Iron oxides – documentary evidencefootnote
Test water    
  Density at 20ΊC
  Solid matter present  
Test temperatures    
  Ambient ΊC
  Test fluid .C. ΊC
  Test water ΊC
     
Diagram of test rig attached
Diagram of sampling arrangement attached

Test Results (in PPM) and Test Procedures

Test fluid C
Signed ………………………………… Date ………………………………… Official stamp
(Official stamp or equivalent identification and the date of approval to be placed on all pages of the test protocol.)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.