Common Structural Rules - Common Structural Rules for Bulk Carriers and Oil Tankers, January 2019 - Part 1 General Hull Requirements - Chapter 5 Hull Girder Strength - Section 2 Hull Girder Ultimate Strength - 1 Application
1 Application
1.1 General
1.1.1 The requirements of this section apply to ships equal to or greater than 150 m in length L.
1.1.2 The hull girder ultimate strength is to be assessed through the cargo hold region and machinery space.
1.1.3 The hull girder ultimate bending capacity is to be checked to
ensure that it satisfies the checking criteria given in [2]. Such checking criteria are applicable to intact ship
structures in the following conditions:
- For bulk carriers: seagoing, harbour/sheltered water and flooded conditions.
- For oil tankers: seagoing and harbour/sheltered water conditions.
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |