2.4 Power source
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Safety of Navigation - Circular SN/Circ.227- Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) – (6 January 2003)Amended by SN/Circ.245 - Annex - Guidelines for the Installation of a Shipborne Automatic Identification System (AIS) - 2 AIS Installation - 2.4 Power source

2.4 Power source

 The AIS should ideally be connected through an uninterrupted power supply (UPS) to the ship’s power supply as defined in SOLAS chapter II-1.

Parent topic: 2 AIS Installation
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.