Clasification Society Rulefinder 2016 - Version 9.25
Clasification Society Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, January 2016 - Part 3 FUNCTIONAL UNIT TYPES AND SPECIAL FEATURES - Chapter 17 Appendix B Guidelines on the Inspection of Positional Mooring Systems - Section 3 Cross-references

Section 3 Cross-references

3.1 Wire rope

3.1.1 API RP 2I and ISO-Standard 4309-1981(E)

(Please note comment in B2.7.2 regarding the ISO-Standard)

3.2 Chain

API RP 2I ‘Recommended Practise for In-service Inspection of Mooring Hardware for Floating Drilling Units’.


Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.