6 Test Report
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1384 – Guidelines for the Testing and Approval of Fixed High-Expansion Foam Systems – (10 December 2010) - Annex – Guidelines for the Testing and Approval of Fized High-Expansion Foam Systems - Appendix 1 – Fire Test Method for Fixed High-Expansion Foam Systems - 6 Test Report

6 Test Report

 The test report should include the following items:

  • .1 name and address of the test laboratory;

  • .2 date and identification number of the test report;

  • .3 name and address of client, manufacturer and/or supplier of the system;

  • .4 purpose of the test;

  • .5 name or other identification marks of the product;

  • .6 description and specifications of the tested system and foam concentrate;

  • .7 date of the test;

  • .8 test methods;

  • .9 drawing of each test configuration and test compartment;

  • .10 identification of the test equipment and instruments used (including type and manufacturer of the foam concentration);

  • .11 nominal flow rate, nominal application rate and nominal filling rate;

  • .12 foam mixing rate;

  • .13 foam expansion;

  • .14 water supply pressure;

  • .15 foam supply pressure and air supply pressure, if applicable, at inlet to foam generator;

  • .16 temperatures at the inside air foam generators;

  • .17 ventilation conditions;

  • .18 conclusions;

  • .19 deviations from the test method, if any;

  • .20 test results including observation and measurement before, during and after the test; and

  • .21 date and signature.

Parent topic: Appendix 1 – Fire Test Method for Fixed High-Expansion Foam Systems
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.