Section 5 Offshore safety and pollution
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 3 Functional Unit Types and Special Features - Chapter 7 Drilling Plant Facility - Section 5 Offshore safety and pollution

Section 5 Offshore safety and pollution

Parent topic: Chapter 7 Drilling Plant Facility

5.1 Standards

5.1.1 Dutyholders are to meet the requirements of the following main Standards and, where applicable, other standards referenced in Pt 12, Ch 1 Recognised Codes and Standards, or equivalent, as a minimum to ensure adequate safety to personnel and the environment.
  • API Spec 14A/ ISO 10432:2004 Specification for subsurface safety valve equipment.
  • API RP 14B/ ISO 10417:2004 Recommended practice for design, installation, repair and operation of subsurface safety valve systems.
  • API RP 14C Recommended practice for analysis, design, installation and testing of basic surface safety systems on offshore production platforms.
  • API RP 14E Recommended practice for design and installation of offshore production platform piping systems.
  • API RP 14F Recommended practice for design and installation of electrical systems for fixed and floating offshore petroleum facilities for unclassified and class I, division 1, and division 2 locations.
  • API RP 14FZ Recommended practice for design and installation of electrical systems for fixed and floating offshore petroleum facilities for unclassified and class I, zone 0, zone 1, and zone 2 locations.
  • API RP 14G Recommended practice for fire prevention and control on fixed open type offshore production platforms.
  • API RP 14J Recommended practice for design and hazards analysis for offshore production facilities.
  • API RP 49 Recommended practice for drilling and well servicing operations involving hydrogen sulfide.
  • API RP 54 Recommended practice for occupational safety and health for oil and gas well drilling and servicing operations.
  • API Std 2000 Venting atmospheric and low-pressure storage tanks.
  • API RP 76 Contractor safety management for oil and gas drilling and production operations.
  • API RP 75 Recommended practices for development of a safety and environmental management program for offshore operations and facilities.
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.