3.6 Load line particulars
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.920 – Model Loading and Stability Manual – (15 June 1999) - Annex – Model Loading and Stability Manual - Section 3 – Technical information (Category 1 and 2)1 - 3.6 Load line particulars

3.6 Load line particulars

  3.6.1 This subsection should contain a statement giving the type of load line assigned (i.e. type A, B, etc.) and a table showing for the appropriate load line marks (winter, summer, tropical, etc.) the values of:

  • .1 draught to bottom of keel;

  • .2 freeboard;

  • .3 displacement mass in seawater (D = 1.025 t/m3); and

  • .4 deadweight.

  3.6.2 If the assessment of freeboard is based on a design trim other than zero, this should be stated. Furthermore, the maximum permissible draught at the forward perpendicular if necessary for bow height consideration should be stated.

  3.6.3 Minimum draught forward and minimum draught aft should be stated with regard to ship handling in heavy weather. This information may be regarded as category 1B information.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.