3 Special requirements
Clasification Society 2023 - Version 9.37
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.1054 – Interim Guidelines for Wing-In-Ground (WIG) Craft - (adopted 16 December 2002)Amended by MSC/Circ.1126 - Annex - Interim Guidelines for Wing-In-Ground (WIG) Craft - Annex 3 - Ice Accretion Applicable to all Types of Craft - 3 Special requirements

3 Special requirements

 Craft intended for operation in areas where ice accretion is known to occur should be:

  • .1 designed to minimize the accretion of ice; and

  • .2 equipped with such means for removing ice as the Administration may require.

Figure 2 Chart of areas of icing conditions

Parent topic: Annex 3 - Ice Accretion Applicable to all Types of Craft
Copyright 2022 Clasification Society Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.