4 Conditions during measurement
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - Noise Levels - Code on Noise Levels on Board Ships – Resolution A.468(XII) - Appendix 1 - Format for Noise Survey Report - 4 Conditions during measurement

4 Conditions during measurement

.1 Date of measurement: Starting time: Completion time:
.2 Ship's position during measurement    
.3 Loading condition of the ship    
.4 Conditions during measurement    
  - Draught forward    
  - Draught aft    
  - Depth of water under keel    
.5 Weather conditions    
  - Wind force    
  - Sea state    
.6 Ship speed      
.7 Actual propeller shaft speed:   rpm
.8 Propeller pitch:      
.9 Propulsion machinery speed: rpm
.10 Propulsion machinery power: kW
.11 Number of propulsion machinery units operating:  
.12 Number of diesel auxiliary engines operating:  
.13 Number of turbogenerators operating:  
.14 Engine room ventilation speed mode (high/low/variable)  
.15 Engine load (%MCR)  
.16 Other auxiliary equipment operating:  
  Ventilation, heating and air conditioning equipment in operation  

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.