Circular
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1330 – Guidelines for Maintenance and Repair of Protective Coatings – (11 June 2009) - Circular

Circular

  1 The Committee, at its eighty-sixth session (27 May to 5 June 2009), having recognized the need for Guidelines for maintenance and repair of protective coatings, taking into account the amendments to SOLAS regulations II-1/3-2 and XII/6 and the Performance standard for protective coatings for dedicated seawater ballast tanks in all types of ships and double-side skin spaces of bulk carriers, adopted by resolutions MSC.216(82)and MSC.215(82), respectively, considered the proposal by the Sub-Committee on Ship Design and Equipment, at its fifty-second session, and approved Guidelines for maintenance and repair of protective coatings, set out in the annex.

  2 Member Governments are invited to apply the annexed Guidelines during survey, assessment and repair of protective coatings in ballast tanks on or after 1 January 2011 and bring them to the attention of shipowners, shipbuilders and other parties concerned.

Parent topic: MSC.1/Circular.1330 – Guidelines for Maintenance and Repair of Protective Coatings – (11 June 2009)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.