3 Education and training for initial certification
of personnel should address, as a minimum:
-
.1 causes of lifeboat accidents;
-
.2 relevant rules and regulations, including international
conventions;
-
.3 design and construction of lifeboats, including
on-load release gear and launching appliances;
-
.4 education and practical training in the procedures
specified in annex 1 of MSC.1/Circ.1206 for which certification is sought;
-
.5 detailed procedures for thorough examination,
operational testing, repair and overhaul of lifeboat, launching appliances
and on-load release gear, as applicable; and
-
.6 procedures for issuing a report of service and
statement of fitness for purpose based on MSC.1/Circ.1206 (annex 1, paragraph 15).
4 The education and training for the personnel
should include practical technical training on actual inspection and
maintenance using the equipment (lifeboats, launching appliances and/or
on-load release gear) for which the personnel are to be certified.
The technical training should include disassembly, reassembly, correct
operation and adjustment of the equipment. Classroom training should
be supplemented by field experience in the operations for which certification
is sought, under the supervision of an experienced senior certified
person.
5 Prior to issuance of certification, a competency
assessment should be satisfactorily completed, using the equipment
for which the personnel are to be certified.