Clasification Society Rulefinder 2020 - Version 9.33 - Fix
Common Structural Rules - Common Structural Rules for Bulk Carriers and Oil Tankers, January 2019 - Part 1 General Hull Requirements - Chapter 11 Superstructure, Deckhouses and Hull Outfitting - Section 4 Supporting Structure for Deck Equipment and Fittings - Symbols

Symbols

For symbols not defined in this section, refer to Ch 1, Sec 4.

SWL : Safe working load as defined in [4.1.4].

Normal stress: The sum of bending stress and axial stress with the corresponding shearing stress acting perpendicular to the normal stress.

Parent topic: Section 4 Supporting Structure for Deck Equipment and Fittings
Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.