3.1 General
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.235(82) - Adoption of the Guidelines for the Design and Construction of Offshore Supply Vessels, 2006 - (adopted on 1 December 2006)Amended by Resolution MSC.335(90) - Annex - Guidelines for the Design and Construction of Offshore Supply Vessels, 2006 - 3 Subdivision and Damage Stability - 3.1 General

3.1 General

 Taking into account, as initial conditions before flooding, the standard loading conditions required by the relevant provisions of Part B of the IS Code and the damage assumptions in 3.2, the vessel should comply with the damage stability criteria as specified in 3.3.

Parent topic: 3 Subdivision and Damage Stability
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.