Calculation of third EOS number for hydrostatic balance method as per 4.3 of the IMO Guidelines (EOS3)
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC/Circular.365 – Interpretation of Requirements for Application of Hydrostatic Balance Loading in Cargo Tanks (Resolution MEPC.64(36)) – (Adopted 26 July 1999) - Annex - IACS Unified Interpretation MPC 7 - Hydrostatic Balance Loading - Calculation of third EOS number for hydrostatic balance method as per 4.3 of the IMO Guidelines (EOS3)

Calculation of third EOS number for hydrostatic balance method as per 4.3 of the IMO Guidelines (EOS3)

  .9 For the purpose of calculating EOS3, the draft is that corresponding to the Hydrostatic Balance Loading (HBL) configuration. Ballast may be used to achieve an increased draft only in determining EOS3.

Filling levels in the tanks identified for HBL should be equal to the maximum level determined by the formula shown in the Appendix to the Guidelines using uniform nominal oil density and corresponding draft. Refer to the annex.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.