Annex II - Certificate
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Conventions - Tonnage - International Convention on Tonnage Measurement of Ships, 1969 - Annex II - Certificate

Annex II - Certificate

INTERNATIONAL TONNAGE CERTIFICATE (1969)
 
(Official seal)
Issued under the provisions of the International Convention on Tonnage Measurement of Ships, 1969, under the authority of the Government of
..............................................................................................................................................
(full official designation of country)
for which the Convention came into force on ............................................................. 19....
by .........................................................................................................................................
(full official designation of the competent person or organization recognized under the provisions of the International Convention on Tonnage Measurement of Ships, 1969)
Name of Ship Distinctive Number or Letters Port of Registry Date*
       

 * Date on which the keel was laid or the ship was at a similar stage of construction (Article 2(6)), or date on which the ship underwent alterations or modifications of a major character (Article 3(2)(b)), as appropriate.

MAIN DIMENSIONS

Length
(Article 2(8))
Breadth
(Regulation 2(3))
Moulded Depth amidships to Upper Deck
(Regulation 212))
     
THE TONNAGES OF THE SHIP ARE:
GROSS TONNAGE ...................................................
NET TONNAGE ...................................................
This is to certify that the tonnages of this ship have been determined in accordance with the provisions of the International Convention of Tonnage Measurement of Ships, 1969.
Issued at ......................................................................................... ...................... 19....
(place of issue of certificate) (date of issue)
.............................................................................................................
(signature of official issuing the certificate)
and/or


(seal of issuing authority)
 
If signed, the following paragraph is to be added:
The undersigned declares that he is duly authorized by the said Government to issue this certificate.
.........................................................................................................  
(Signature)  
SPACES INCLUDED IN TONNAGE
GROSS TONNAGE NET TONNAGE
Name of Space Location Length Name of Space Location Length
Underdeck - -






   
NUMBER OF PASSENGERS
Number of passengers in cabins with not more than 8 berths ....................................
Number of other passengers .....................

EXCLUDED SPACES
(Regulation 2(5))


An asterisk (*) should be added to those spaces listed above which comprise both enclosed and excluded spaces.

MOULDED DRAUGHT
(Regulation 4(2))


Date and place of original measurement ............................................................................
Date and place of last previous remeasurement ................................................................
REMARKS:












Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.