Regulation 7 - Measurement and Calculation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Conventions - Tonnage - International Convention on Tonnage Measurement of Ships, 1969 - Annex I - Regulations for Determining Gross and Net Tonnages of Ships - Regulation 7 - Measurement and Calculation

Regulation 7 - Measurement and Calculation

  (1) All measurement used in the calculation of volumes shall be taken to the nearest centimetre or one-twentieth of a foot.

  (2) The volumes shall be calculated by generally accepted methods for the space concerned and with an accuracy acceptable to the Administration.

  (3) The calculation shall be sufficiently detailed to permit easy checking.

Parent topic: Annex I - Regulations for Determining Gross and Net Tonnages of Ships
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.