"The following shall be carried out by the Administration
prior to reviewing the Coating Technical File for the ship subject
to this Standard:
-
.1
check that the Technical Data Sheet and
Statement of Compliance or Type Approval Certificate comply with this
Standard;
-
.2
check that the coating identification
on representative containers is consistent with the coating identified
in the Technical Data Sheet and Statement of Compliance or Type Approval
Certificate;
-
.3
check that the inspector is qualified
in accordance with the qualification standards in paragraph 6.1.1;
-
.4
check that the inspector's reports of
surface preparation and the coating's application indicate compliance
with the manufacturer's Technical Data Sheet and Statement of Compliance
or Type Approval Certificate; and
-
.5
monitor implementation of the coating
inspection requirements."