6.3 Door operation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.754(18) – Recommendation on Fire Resistance Tests for “A”, “B” and “F” Class Divisions – (Adopted on 4 November 1993) - Annex - Recommendation on Fire Resistance Tests for “A”, “B” and “F” Class Divisions1 - 6 Examination of the Test Specimens - 6.3 Door operation

6.3 Door operation

 Similarly, immediately prior to test, the laboratory should check the operability of the door by opening the door leaf by a distance of at least 300 mm. The door leaf should then be closed, either automatically, if such a closing device is provided, or manually. The door may be latched for the test but should not be locked, and no devices for latching or locking should be included which are not normally incorporated in practice.

Parent topic: 6 Examination of the Test Specimens
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.