6.3.2 Welding consumables
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - 1983 IGC Code - International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk - Chapter 6 Materials of Construction - 6.3 Welding and non-destructive testing - 6.3.2 Welding consumables

6.3.2 Welding consumables

 Welding consumables intended for welding of cargo tanks should be in accordance with Recognized Standards unless otherwise agreed with the Administration. Deposited weld metal tests and butt weld tests should be required for all welding consumables, unless otherwise specially agreed with the Administration. The results obtained from tensile and Charpy V-notch impact tests should be in accordance with Recognized Standards. The chemical composition of the deposited weld metal should be recorded for information and approval.

Parent topic: 6.3 Welding and non-destructive testing
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.