Clasification Society Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, January 2016 - Part 6 CONTROL AND ELECTRICAL ENGINEERING - Chapter 2 Electrical Engineering - Section 9 Rotating machines
Section 9 Rotating machines
9.1 Construction, performance, control and testing
9.1.1 The requirements for construction, performance, control and testing of rotating machines are given in IEC 61892-3:2012, Mobile and fixed offshore units – Electrical installations – Part 3: Equipment, Section 5 and Pt 6, Ch 2, 9 Rotating machines of the Rules for Ships, which are to be complied with.
9.1.2 Additions or amendments to these requirements are given in Pt 6, Ch 2, 9.2 Temperature rise.
9.2 Temperature rise
9.2.1 The limits of temperature rise specified in Pt 6, Ch 2, 9.4 Generator control 9.4.3 in Pt 6, Ch 2, 9.3 Temperature rise of the Rules for Ships are based on the cooling air temperature and cooling water temperature given in Pt 6, Ch 2, 1.9 Ambient reference and operating conditions 1.9.2.
9.2.2 If it is known that the temperature of cooling medium exceeds the values given in Pt 6, Ch 2, 1.9 Ambient reference and operating conditions 1.9.2 the permissible temperature rise is to be reduced by an amount equal to the excess temperature of the cooling medium.
9.2.3 If it is known that the temperature of cooling medium will be permanently less than the values given in Pt 6, Ch 2, 1.9 Ambient reference and operating conditions 1.9.2 the permissible temperature rise may be increased by an amount equal to the difference between the declared temperature and that given in Pt 6, Ch 2, 1.9 Ambient reference and operating conditions 1.9.2, up to a maximum of 15°C.
| Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |