2.26 Table 2 – Means of Access for Bulk Carriers, Paragraph 2.3
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1464/Rev.1 - Unified Interpretations of SOLAS Chapters II-1 and XII, of the Technical Provisions for Means of Access for Inspections (Resolution MSC.158(78)) and of the Performance Standards - Annex - 2 Technical Provisions for Means of Access for Inspections (Resolution MSC.158(78)) - 2.26 Table 2 – Means of Access for Bulk Carriers, Paragraph 2.3

2.26 Table 2 – Means of Access for Bulk Carriers, Paragraph 2.3

Parent topic: 2 Technical Provisions for Means of Access for Inspections (Resolution MSC.158(78))

Interpretation

 If the longitudinal structures on the sloping plate are fitted outside of the tank, a means of access should be provided.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.