6.2.4 Containers for marine evacuation systems
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - LSA Code - International Life-Saving Appliance Code – Resolution MSC.48(66) - Chapter VI - Launching and Embarkation Appliances - 6.2 Marine evacuation systems - 6.2.4 Containers for marine evacuation systems

6.2.4 Containers for marine evacuation systems

  6.2.4.1 The evacuation passage and platform shall be packed in a container that is:

  • .1 so constructed as to withstand hard wear under conditions encountered at sea; and

  • .2 as far as practicable watertight, except for drain holes in the container bottom.

  6.2.4.2 The container shall be marked with:

  • .1 maker's name or trade mark;

  • .2 serial number;

  • .3 name of approval authority and the capacity of the system;

  • .4 SOLAS;

  • .5 date of manufacture (month and year);

  • .6 date and place of last service;

  • .7 maximum permitted height of stowage above waterline; and

  • .8 stowage position on board.

  6.2.4.3 Launching and operating instructions shall be marked on or in the vicinity of the container.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.