15 Information regarding system configuration for surveyor
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.302(87) – Adoption of Performance Standards for Bridge Alert Management – (Adopted on 17th May 2010) - Annex – Performance Standards for Bridge Alert Management - Module D – System and Equipment Documentation - 15 Information regarding system configuration for surveyor

15 Information regarding system configuration for surveyor

 Manufacturer or system integrator of CAM should declare the following information relating to the system configuration, if applicable:

  • .1 basic system configuration;

  • .2 data flow schematic diagram and its interpretation; and

  • .3 back-up and redundancy arrangement.

Parent topic: Module D – System and Equipment Documentation
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.