Annex 8 – Survey Reporting Principles

  1.1 A survey report shall be generated in the following cases:

• .1 in connection with commencement, continuation and/or completion of periodical hull surveys, i.e. annual, intermediate and renewal surveys, as relevant;

• .2 when structural damages/defects have been found;

• .3 when repairs, renewals or modifications have been carried out; and

• .4 when a condition of class (recommendation) has been imposed or has been deleted.

  1.2 The reporting shall provide:

• .1 evidence that prescribed surveys have been carried out in accordance with applicable requirements;

• .2 documentation of surveys carried out with findings, repairs carried out and condition of class (recommendation) imposed or deleted;

• .3 survey records, including actions taken, which shall form an auditable documentary trail. Survey reports shall be kept in the survey report file required to be on board;

• .4 information for planning of future surveys; and

• .5 information which may be used as input for maintenance of classification requirements and instructions.

  1.3 When a survey is split between different survey stations, a report shall be made for each portion of the survey. A list of items surveyed, relevant findings and an indication of whether the item has been credited, shall be made available to the next attending surveyor, prior to continuing or completing the survey. Thickness measurement and tank testing carried out shall also be listed for the next surveyor.

  2.1 Identification of compartments where an overall survey has been carried out.

  2.2 Identification of locations, in each tank, where a close-up survey has been carried out, together with information of the means of access used.

  2.3 Identification of locations, in each tank, where thickness measurement has been carried out.

• Note: As a minimum, the identification of location of close-up survey and thickness measurement shall include a confirmation with description of individual structural members corresponding to the extent of requirements stipulated in this part of annex B based on type of periodical survey and the ship's age.

Where only a partial survey is required, i.e. one web frame ring/one deck transverse, the identification shall include the location within each ballast tank and cargo tank by reference to frame numbers.

  2.4 For areas in tanks where the protective coating is found to be in GOOD condition and the extent of close-up survey and/or thickness measurement has been specially considered, structures subject to special consideration shall be identified.

  2.5 Identification of tanks subject to tank testing.

  2.6 Identification of cargo piping systems on deck, including crude oil washing (COW) piping, and ballast piping within cargo and ballast tanks, pump-rooms, pipe tunnels, cofferdams and void spaces where:

• .1 examination, including internal examination of piping with valves and fittings and thickness measurement, as relevant, has been carried out; and

• .2 operational test to working pressure has been carried out.

  3.1 Type, extent and condition of protective coating in each tank, as relevant (rated GOOD, FAIR or POOR.

  3.2 Structural condition of each compartment with information on the following, as relevant:

• .1 Identification of findings, such as:

  • .1 corrosion with description of location, type and extent;

  • .2 areas with substantial corrosion;

  • .3 cracks/fractures with description of location and extent;

  • .4 buckling with description of location and extent; and

  • .5 indents with description of location and extent.

• .2 Identification of compartments where no structural damages/defects are found. The report may be supplemented by sketches/photographs;

• .3 Thickness measurement report shall be verified and signed by the surveyor witnessing the measurements on board; and

• .4 Evaluation result of longitudinal strength of the hull girder of oil tankers of 130 m in length and upwards and over 10 years of age. The following data shall be included, as relevant:

  • .1 measured and as-built transverse sectional areas of deck and bottom flanges;

  • .2 diminution of transverse sectional areas of deck and bottom flanges; and

  • .3 details of renewals or reinforcements carried out, as relevant (see 4.2).

  4.1 Whenever the attending surveyor is of the opinion that repairs are required, each item to be repaired shall be identified in a survey report. Whenever repairs are carried out, details of the repairs effected shall be reported by making specific reference to relevant items in the survey report.

  4.2 Repairs carried out shall be reported with identification of:

• .1 compartment;

• .2 structural member;

• .3 repair method (i.e. renewal or modification), including:

  • .1 steel grades and scantlings (if different from the original); and

  • .2 sketches/photographs, as appropriate;

• .4 repair extent; and

• .5 non-destructive tests (NDT)/tests.

  4.3 For repairs not completed at the time of survey, a condition of class/recommendation shall be imposed with a specific time limit for the repairs. In order to provide correct and proper information to the surveyor attending for survey of the repairs, the condition of class/recommendation shall be sufficiently detailed with identification of each item to be repaired. For identification of extensive repairs, reference may be given to the survey report.