7.1 Test set-up
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code - Technical Code on Control of Emission of Nitrous Oxides from Marine Diesel Engines - Appendix 4 - Calibration of the analytical instruments - 7 Efficiency test of the NOx converter - 7.1 Test set-up

7.1 Test set-up

 Using the test set-up as shown in figure 1 below (see also 3.4 of appendix 3 of this Code) and the procedure below, the efficiency of converters shall be tested by means of an ozonator.

Figure 1 Schematic of NO2 converter efficiency device

Parent topic: 7 Efficiency test of the NOx converter
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.