Pt 3 - Test for “A”, “B” and “F” class divisions
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.916 – Interpretations of the International Code for the Application of Fire Test Procedures (FTP Code) and Fire Test Procedures Referred to in the Code – (Adopted on 4 June 1999) - Annex - Interpretations of the FTP Code and Fire Test Procedures Referred to in the Code - Pt 3 - Test for “A”, “B” and “F” class divisions

Pt 3 - Test for “A”, “B” and “F” class divisions

  Paragraph 2.1 (paragraph 2.6.2.2 of resolution A.754(18))

 “B" class doors should be fire tested in B class steel bulkheads of dimensions as stated in paragraph 2.4.1 of resolution A.754(18), otherwise approval should be limited to the type of construction in which the door was tested.

  Paragraph 3.1

 The calcium silicate board described as a dummy specimen specified in paragraph 3.3 of resolution A.653(16) should be used as a standard substrate for adhesives.

  Paragraph 1.7 of resolution A.754(18)

 “B" class constructions should be tested without finishes. For constructions where this is not possible, finishes should be included in the non-combustibility test of the construction.

  Paragraph 1.2 of resolution A.754(18)

 The thickness of insulation on the stiffeners need not be the same as that of the steel plate.

  Paragraph 4.1 of Appendix A.III and paragraph 4.1 of Appendix A.IV of resolution A.754(18)

 Penetrations and transits should meet both integrity and insulation criteria.

Parent topic: Annex - Interpretations of the FTP Code and Fire Test Procedures Referred to in the Code
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.