Supplement to Engine International Air Pollution Prevention Certificate (EIAPP Certificate)
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code - Technical Code on Control of Emission of Nitrous Oxides from Marine Diesel Engines - Appendix 1 - Form of EIAPP Certificate - Supplement to Engine International Air Pollution Prevention Certificate (EIAPP Certificate)

Supplement to Engine International Air Pollution Prevention Certificate (EIAPP Certificate)

RECORD OF CONSTRUCTION, TECHNICAL FILE AND MEANS OF VERIFICATION
In respect of the provisions of Annex VI of the International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocols of 1978 and 1997 relating thereto (hereinafter referred to as "the Convention") and of the Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines (hereinafter referred to as the "NOx Technical Code").

Note 1 This record and its attachments shall be permanently attached to the EIAPP Certificate. The EIAPP Certificate shall accompany the engine throughout its life and shall be available on board the ship at all times.

Note 2 The Record shall be at least in English, French or Spanish. If an official language of the issuing country is also used, this shall prevail in case of a dispute or discrepancy.

Note 3 Unless otherwise stated, regulations mentioned in this Record refer to regulations of Annex VI of the Convention and the requirements for an engine's technical file and means of verifications refer to mandatory requirements from the NOx Technical Code.

1 =

Particulars of the engine
1.1 =

Name and address of manufacturer .........................................

1.2 =

Place of engine build .................................................................

1.3 =

Date of engine build ...................................................................

1.4 =

Place of pre-certification survey ................................................

1.5 =

Date of pre-certification survey .................................................

1.6 =

Engine type and model number ................................................

1.7 =

Engine serial number ................................................................

1.8 =

If applicable, the engine is a parent engine or a member engine of the following engine family or engine group .....................................................................................................................................

1.9 =

Test cycle(s) (see chapter 3 of the NOx Technical Code) .................................................................................

1.10 =

Rated power (kW) and speed (rpm) ....................................

1.11 =

Engine approval number .........................................................

1.12 =

Specification(s) of test fuel ......................................................

1.13 =

NOx-reducing device designated approval number (if installed) .........................................

1.14 =

Applicable NOx emission limit (g/kW h) (regulation 13 of Annex VI) .........................................

1.15 =

Engine's actual NOx emission value (g/kW h) .........................................

2 =

Particulars of the technical file
2.1 =

Technical file identification/approval number ...........................

2.2 =

Technical file approval date .....................................................

2.3 =

The technical file, as required by chapter 2 of the NOx Technical Code, is an essential part of the EIAPP Certificate and must always accompany an engine throughout its life and always be available on board a ship.

3 =

Specifications for the On-board NOx verification procedures for the engine parameter survey

3.1 =

On-board NOx verification procedures identification/approval number ..........................................................................

3.2 =

On-board NOx verification procedures approval date .........................................

3.3 =

The specifications for the on-board NOx verification procedures, as required by chapter 6 of the NOx Technical Code, are an essential part of the EIAPP Certificate and must always accompany an engine through its life and always be available on board a ship.

THIS IS TO CERTIFY that this Record is correct in all respects.
Issued at ..............................................................................................................................
(Place of issue of the Record)
.......................................... 20 .... ................................................................
(Date of issue) (signature of duly authorized official issuing the Record)
(Seal or stamp of the authority, as appropriate)
Parent topic: Appendix 1 - Form of EIAPP Certificate
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.