Section 2 Materials
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Linkspans, July 2022 - Part 3 Construction, Design and Test Requirements - Chapter 7 Mooring and Tethering Arrangements - Section 2 Materials

Section 2 Materials

Parent topic: Chapter 7 Mooring and Tethering Arrangements

2.1 Approved manufacturers

2.1.1 All chains, ropes, cables and loose gear used for mooring systems are to be supplied from an approved manufacturer and are to have been tested in a Recognized Proving Establishment as defined in LR's List of Approved Manufacturers and Recognized Proving Establishments.

2.2 Tethering arrangements

2.2.1 The material used in any fabricated primary structural member in the tethering arrangement is to comply with Rules for the Manufacture, Testing and Certification of Materials, July 2022.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.