Section 3 Longitudinal strength
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Ships, July 2022 - Part 4 Ship Structures (Ship Types) - Chapter 11 Ore Carriers - Section 3 Longitudinal strength

Section 3 Longitudinal strength

Parent topic: Chapter 11 Ore Carriers

3.1 General

3.1.1 The longitudinal strength standard is to comply with the relevant requirements of Pt 3, Ch 4 Longitudinal Strength.

3.1.2 For ships of length ≥150 m, with holds where any part of the longitudinal bulkhead is located within B/5 or 11,5 m, whichever is less, inboard from the ship’s side at right angles to the centreline at the assigned summer load line, the requirements of Pt 4, Ch 7, 3 Longitudinal strength are also to be applied.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.