Section 6 Reciprocating internal combustion engines
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Naval Ships, January 2023 - Volume 2 Machinery and Engineering Systems - Part 1 General Requirements - Chapter 3 Requirements for Design, Construction, Installation and Sea Trials of Engineering Systems - Section 6 Reciprocating internal combustion engines

Section 6 Reciprocating internal combustion engines

6.1 Design and testing

6.1.1  For details of design requirements, see Vol 2, Pt 2, Ch 1 Reciprocating Internal Combustion Engines.

6.1.2 For details of materials and component testing requirements, see Vol 2, Pt 2, Ch 1, 2 Materials and components.

6.1.3 For details of engine type testing requirements, see Vol 2, Pt 2, Ch 1, 13 Type Testing – General and LR’s Type Approval Test Specification No. 4 – Type Testing of Reciprocating Internal Combustion Engines and Associated Ancillary Equipment.

6.2 Construction and welding

6.2.1 Welding of engine structures is to be in accordance with the requirements specified in Ch 13 Requirements for Welded Construction of the Rules for the Manufacture, Testing and Certification of Materials (hereinafter referred to as the Rules for Materials).

6.2.2 On completion of welding and stress relief heat treatment, welds are to be examined. Welds in transverse girder assemblies are to be crack detected by an approved method. Other joints are to be similarly tested if required by the Surveyors.

6.2.3 Forgings and castings are to be examined at the manufacturer's works.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.