Section 5 Requirements for craft which are not required to comply with the HSC Code
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Special Service Craft, July 2022 - Part 13 Shaft Vibration and Alignment - Chapter 1 Torsional Vibration - Section 5 Requirements for craft which are not required to comply with the HSC Code

Section 5 Requirements for craft which are not required to comply with the HSC Code

Parent topic: Chapter 1 Torsional Vibration

5.1 General requirements

5.1.1 The requirements of this Chapter do not apply to the following types of vessel having main engines not exceeding 500kW power output or auxiliary engines not exceeding 110kW output for essential services:

  1. Service craft of less than 24 m.

  2. Yachts.

  3. ACVs.
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.