Section 16 Requirements for Air Cushion Vehicles
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Special Service Craft, July 2022 - Part 15 Piping Systems and Pressure Plant - Chapter 2 Ship Piping Systems - Section 16 Requirements for Air Cushion Vehicles

Section 16 Requirements for Air Cushion Vehicles

Parent topic: Chapter 2 Ship Piping Systems

16.1 General

16.1.1 At least three copies of the following diagrammatic plans are to be submitted together with a general description of each system, indicating operating pressures and temperatures etc. safety devices incorporated and means of protection against corrosion and contamination:

  • Fuel oil.
  • Lubricating oil.
  • Hydraulic and pneumatic systems.
  • Pumping arrangements for draining and trimming.
  • Air filtering to power units.

16.1.2 Reference is to be made to the Rules for the Classification of Air Cushion Vehicles, July 2022.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.