Latvia - Special requirements by the Latvian Administration

Latvia

Flag instructions relating to statutory surveys

Flag procedural requirements

Standing requirements
Standing requirementsAction by
1- Reporting on entry into classMOC
2- Reporting on requests for exemptions or interpretationsMOC
3- Reporting on cases of major deficiencies, as per IACS Recommendation No. 98 (Duties of surveyors under statutory conventions and codes)MOC
4- Pre-authorisation prior to extending statutory certificatesMOC
5- Pre-authorisation prior to issuing conditional certificatesMOC
6- Reporting on detentionsDO-FM
7- Submission of copies of statutory certificates (upon request)DO-FM
8- Reporting on class suspension or class modificationMOC
9- Reporting on class withdrawalDO-FM
Specific requirements 
10- Submission of the tonnage certificates (hard copy)DO-FM

General policy

Communication with the Administration

Communication with the Administration should be performed through Recognised Organisation (RO) Riga.

Recognised Organisation (RO) shall inform the Administration of all scheduled statutory surveys and ISM audits of Latvian ships to be conducted by the RO in Latvian ports in advance.

Agreement

An Agreement between the Maritime Administration of Latvia and Recognised Organisation (RO) SA has been signed with entering into force on 18 December 2025 (refer to Agreement governing the delegation of statutory certification services to Appendix 3 to the Agreement).

Authorizations for services outside the scope of Appendix 1 to this Agreement (refer to Appendix 1 to the Agreement) will be dealt with as mutually agreed on a case-by-case basis.

Exemptions, deviations and equivalent solutions

(Refer to Agreement in Agreement governing the delegation of statutory certification services)

Exemptions and deviations from, and equivalents to, the requirements of the applicable instruments are the prerogative of the Administration and must be approved by the Administration prior to issuance.

Requests to the Administration for equivalents and exemptions must always be proposed by the owner of the ship in question.

The request must be forwarded first to Recognised Organisation (RO), which shall process the request and make any necessary plan approvals, before forwarding their well-founded recommendation including all relevant documentation, calculations, and suggested conditions to the Administration.

If the request is granted, the Administration may add conditions or comments to the recommendations made by Recognised Organisation (RO).

Recognised Organisation (RO) shall obtain approval from the Administration before first issue of any exemptions from the requirements stipulated in any of the applicable instruments.

In instances where, temporarily, the requirements of an applicable instrument cannot be met under particular circumstances, proposals for such measures or supplementary equipment as may be available to permit the ship to proceed to a suitable port where permanent repairs or rectifications can be effected or replacement equipment fitted are to be acceptable to Recognised Organisation (RO) and agreed by the Administration.

Recognised Organisation (RO) may decide on equivalents within the framework of this Agreement. If the owner insists Recognised Organisation (RO) is obliged to forward requests for equivalents to the Administration.Recognised Organisation (RO) shall furnish the vessel with a signed statement describing the measures or supplementary equipment specified and the time limit for permanent repairs or rectification. A copy of this statement shall be forwarded to the Administration for information. This may be in the form of e-mail to the Administration at the address: kdi@lja.lv

Class suspended or class withdrawal

The Administration shall be informed without delay, through Recognised Organisation (RO) Riga, in case of class suspension or class withdrawal (refer to Appendix II to the Agreement in Appendix 2 to the Agreement).

The scope and extend of survey to be performed before issuing any certificates to a ship which has been class suspended or withdrawn, should be determined together with the Administration (refer to Appendix II to the Agreement in Appendix 2 to the Agreement).

European Marine Equipment Directive 2014/90/EU

Directive 2014/90/EU of the European Parliament and of the Council of 23/7/2014 on marine equipment repeals Council Directive 96/98/EC.

Refer to Statutory surveys - General section 8.

Electronic Certificates

(Administration email dated 23/09/2019)

The Administration confirms the acceptance of e-certificates issued by Recognised Organisation (RO) in accordance with IMO Guidelines FAL.5/Circ.39/Rev.2.

Technical requirements

Administration web site

The web site of the Administration is available at: www.lja.lv

Interpretations

(Refer to Agreement in Agreement governing the delegation of statutory certification services)

Final interpretations of the applicable instruments, as well as the final determination of equivalents or the final acceptance of substitutes to the requirements of the applicable instruments remain the prerogative of the Administration. Recognised Organisation (RO) will co-operate in their establishment as necessary.

Recognised Organisation (RO) may decide on interpretations within the framework of this Agreement. If the owner insists Recognised Organisation (RO) is obliged to forward requests for interpretations to the Administration.

Unified IMO and the International Associations of Classification Societies (IACS) interpretations will be accepted by the Administration, unless they are in conflict with the Administration interpretations in which case the Administration has to instruct Recognised Organisation (RO). Interpretations of the Administration are in the form of internal circulars. Administration will inform Recognised Organisation (RO) about adoption of respective circulars and publish them at the website of the Administration (www.lja.lv) as soon as they are adopted. Any other written instruction issued by the Administration for execution of authority under this Agreement can be considered as the interpretation of the Administration.

Interpretations regarding implementation of international statutory requirements which contain references “to the satisfaction of the Administration”, “to be specified by the Administration”, “in the opinion of the Administration” and “consideration by the Administration” shall be published at the website of the Administration (www.lja.lv) by the Administration.

All “footnotes” in the IMO instruments shall be treated in accordance with the IMO Assembly Resolution A.911(22) (adopted on 29 November 2001) on “Uniform Wording for Referencing IMO Instruments”.

ILLC 66

Untitled

RESERVED

SOLAS 74

Cargo Ship Safety Construction Certificate

Lifting appliances (SOLAS II-1/3-13)

(Circular No.1 - 25 March 2026)

Recognised Organisation (RO) may apply the survey windows for all testing and/or thorough examinations required by SOLAS regulation II-1/3-13 in accordance with the Recognised Organisation (RO) procedures.

Recognised Organisation (RO) may apply the survey windows for all testing and/or thorough examinations conducted on or after 1 January 2026, even if such examinations occur before the first renewal survey, in accordance with the Recognised Organisation (RO) procedures.

A Competent Person is a Recognised Organisation (RO) Surveyor who has successfully completed the training and acquired the knowledge and experience required to perform the duties specified in MSC.1/Circular 1663 Guidelines for lifting appliances, in accordance with the Recognised Organisation (RO) procedures.

The requirement of the SOLAS 2023 Amendment, Chapter II-1, Regulation 3-13, is not required to be applied to lifting appliances with a Safe Working Load (SWL) of less than 1,000 kg. Recognised Organisation (RO) may apply its procedures for the testing and/or thorough examinations of lifting appliances that have SWL below 1,000 kg. Lifting appliances with an SWL below 1,000 kg may be tested as part of the ship’s maintenance program under the Safety Management System.

MARPOL 73/78

Annex I. IOPP certificate

RESERVED

Annex II. NLS certificate

RESERVED

Annex IV. ISPP certificate

RESERVED

Annex V

RESERVED

Annex VI

Data Collection System for fuel oil consumption of ships

Recognised Organisation (RO) is authorized to perform the following statutory services:

  • Reviewing of SEEMP Part II and issuance of Confirmation of Compliance, (MARPOL Annex VI, Regulation 5, para. 4.5)

  • Verification of reporting data, (MARPOL Annex VI, Regulation 27)

  • Issuance of Statement of Compliance (MARPOL Annex VI, Regulation 5, para. 4.5)

  • Submission of reported data to the IMO Ship Fuel Oil Consumption Database ((MARPOL Annex VI, Regulation 27, para. 9)

EEDI, EEXI and CII

Recognised Organisation (RO) is authorized on Recognised Organisation (RO) classed ships for the approval of:

  • the technical file for Energy Efficiency Design Index (EEDI),

  • the technical file for Energy Efficiency Existing Ship Index (EEXI),

  • the Onboard Management Manual (OMM) for Shaft Power / Engine Power Limitation.

Recognised Organisation (RO) is authorized to issue a Statement of Compliance covering Operational Carbon Intensity rating (CII).

Vessels not trading

For vessels which did not trade a single nautical mile in the reporting period, the CII index as well as the rating should be indicated/reported as ‘N/A’ in the IMO system.

BWM Convention

Authorization

(Circular No.24 dated 17/12/2018)

Further entry into force of BWM Convention on 11 January 2019, Recognised Organisation (RO) is authorized to issue international BWM certificate.

The Maritime Administration of Latvia is a focal point for Exemptions in waters under jurisdiction of Latvia (Reg. A-4).

For further information, refer to attached file “Circulars 24.pdf”.

Decoupling IOPP certificate

(Circular No. 19)

The Administration allows decoupling of the IOPP certificate from other certificates thus retreating from HSSC application. No prior agreement is required from the Administration.

For further information, refer to attached file “BWMC_circular”.

MISCELLANEOUS TECHNICAL REQUIREMENTS

High Speed Offshore Service Craft Code (HSOSC)

(Circular 10.1-1/N-8 - 04 March 2026)

Taking into account this discretion and recognizing the High Speed Offshore Service Craft Code (HSOSC), approved by the Secretary of State of the United Kingdom and published on 9 February 2022, as an internationally recognized and practically established standard for the design, construction and operation of offshore high-speed craft, the Adminsitration hereby declares that it will, in principle, accept the equivalents and exemptions provided for in Chapter 9 of the HSOSC in relation to Chapters 2–19 of the HSC Code for offshore high-speed craft.

When applying the equivalents and exemptions provided for in Chapter 9 of the HSOSC in relation to Chapters 2–19 of the HSC Code, the requirements of Chapter 12.1 of the Regulations shall also be complied with. Where Chapter 12.1 of the Regulations prescribes, in respect of the same provision of the HSC Code, a different equivalent or alternative requirement than that provided for in the HSOSC, the provisions of Chapter 12.1 of the Regulations shall prevail.

The Administration invites recognized organizations, in relation to offshore high-speed craft, to also apply the additional or enhanced safety requirements provided for in Chapter 9 of the HSOSC in conjunction with Chapters 2–19 of the HSC Code, insofar as the national legislation of the Republic of Latvia does not prescribe different or higher requirements or stricter limitations in the relevant field.

When applying the HSOSC, references therein to the United Kingdom (“United Kingdom”, “UK”) shall, in the relevant context, be construed as references to the Republic of Latvia. When applying the HSOSC, references therein to the United Kingdom Maritime and Coastguard Agency (“Maritime and Coastguard Agency”, “MCA”) shall, in the relevant context, be construed as references to the State limited liability company “Maritime Administration of Latvia”, its Maritime Safety Inspectorate, or a recognized organization duly authorized in accordance with the applicable laws and regulations.

High-Speed Craft Safety Certificate

If the Administration has authorized a craft to apply all equivalents and exemptions provided for in Chapter 9 of the HSOSC in relation to Chapters 2–19 of the HSC Code, it is recommended that the following note be included in the high-speed craft safety certificate:

“Equivalents and exemptions applied in accordance with Cabinet Regulation No. 49 of 29 January 2008 of the Republic of Latvia and Circular No. 10.1-1/N-8 of the Maritime Administration of Latvia of 04 March 2026 (available on the MAL website).”

If the Administration has not authorized the application of certain equivalents or exemptions provided for in Chapter 9 of the HSOSC in relation to Chapters 2–19 of the HSC Code for a particular craft, clear references to the respective exceptions shall additionally be included in the safety certificate, for example:

“… except for the equivalents and exemptions provided for in Chapter 9 of the HSOSC in relation to Section [specific section] of the HSC Code.”

Ship Recycling & IHM

Recognised Organisation (RO) is authorized to issue the Certificate on the Inventory of Hazardous Materials in accordance with the Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships, 2009 (Hong Kong Convention, 2009), and Regulation (EU) No 1257/2013 of the European Parliament and of the Council on ship recycling, using the format specified in Commission Implementing Decision (EU) 2016/121.

Recognised Organisation (RO) is authorized to issue the International Ready for Recycling Certificate in accordance with the Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships, 2009 (Hong Kong Convention, 2009), and Regulation (EU) No 1257/2013 of the European Parliament and of the Council on ship recycling, using the format specified in Commission Implementing Decision (EU) 2016/116.

Cape Town Agreement of 2012 (CTA)

Following the entry into force of the Cape Town Agreement, Recognised Organisation (RO) would be expected to issue a “Statement of Compliance” or “Document of Compliance” on behalf of Recognised Organisation (RO) itself, rather than International Convention Certificates on behalf of the Administration, in accordance with paragraph 9 of Appendix I to the Authorization Agreement.

As an EU Member State, the Administration has fully implemented the requirements of Directive 97/70/EC, and the national regulations allow the use of the Harmonized Survey and Certification System (5-year survey cycle) for the Fishing Vessel Safety Certificate under Directive 97/70/EC. Therefore, in the future, it should be possible to harmonize the surveys required for the Fishing Vessel Safety Certificate under Directive 97/70/EC with the surveys required for the Statement/Document of Compliance issued under the Cape Town Agreement.

ISM Code

Authorization & Instructions

Audit and ship type accreditation
Ship typePSPHPRBCOTCTGCCHCSMO

Document of Compliance

Interimxxxxxxxxxx
Initialxxxxxxxxxx
Periodicalxxxxxxxxxx
Additionalxxxxxxxxxx
Renewalxxxxxxxxxx

Safety Management Certificate

Interimxxxxxxxxxx
Initialxxxxxxxxxx
Intermediatexxxxxxxxxx
Additionalxxxxxxxxxx
Renewalxxxxxxxxxx

Note:

 
Requirements of the Administration
Requirements of the AdministrationAction by
  
Reference documents

Refer to Appendix I to the Agreement in Appendix 1 to the Agreement

ISPS Code

Authorization & Instructions

SSP approval / reviewShip auditISSC issuance
NoCase by caseNo

Observation(s):

European Regulation (EC) No. 725/2004 of 31 March 2004 shall be applied from 1st July 2004.

ItemSpecific requirements
SSP- SSP or any amendments shall be prepared in the working language (languages) of the ship. If it is not English, a translation in English shall also be prepared. The company shall verify by documents that the translations of the plan in different languages are authentic. - SSP must be fully revised at least once every 6 months.
Part B mandatorySee items (8), (16) and Article 3, item 5 of the EC Regulation (see observation above).
ISSC issuanceDefinitive ISSC by Flag Administration. Interim ISSC - maximum 5 months
Document of referenceFax No. 1-30/116 dated 26/02/04

MLC, 2006

Scope of authorisation

DMLC II
 YesNoObservation
Approval of DMLC IIX  
Inspection & certification
 InspectionCertification
YesNo
Full recognition (Recognised Organisation (RO) is RO)XX 

Appendix — Agreement governing the delegation of statutory certification services

Agreement

See the attached file “Agreement_RO SA_Latvia_18122025”

Appendix 1 to the Agreement

Applicable instruments and degree of authorization

See the attached file “Appendix I_RO SA_Latvia”

Appendix 2 to the Agreement

Reporting to the competent Authority

See the attached file “Appendix II_RO SA_Latvia”

Appendix 3 to the Agreement

References to Latvian national regulations

See the attached file “Appendix III_RO SA_Latvia”