1 Introduction
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code (2008) - Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines - Appendix 4 - Calibration of the analytical and measurement instruments - 1 Introduction

1 Introduction

  1.1 Each analyser used for the measurement of an engine’s parameters shall be calibrated as often as necessary in accordance with the requirements of this appendix.

  1.2 Except as otherwise specified, all results of measurements, test data or calculations required by this appendix shall be recorded in the engine’s test report in accordance with section 5.10 of this Code.

Parent topic: Appendix 4 - Calibration of the analytical and measurement instruments
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.