4.2 Exhaust gas density
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.103(49) - Guidelines for On-Board NOx Verification Procedure - Direct Measurement and Monitoring Method - (adopted on 18 July 2003) - Annex - Guidelines for On-Board NOx Verification Procedure - Direct Measurement and Monitoring Method - 4 Data Evaluation - 4.2 Exhaust gas density

4.2 Exhaust gas density

 Exhaust gas density, to calculate gas mass flow wet (GEXHW) and NOx Technical Code Table 5, coefficient 'u', should be provided by one of the following:

  • .1 calculation as per the NOx Technical Code, appendix 6; or

  • .2 default value of 1.293 kg/m3 ( 273.15 K and 101.3 kPa).

Parent topic: 4 Data Evaluation
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.