Section 10 Structural details
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Ships, July 2022 - Part 4 Ship Structures (Ship Types) - Chapter 11 Ore Carriers - Section 10 Structural details

Section 10 Structural details

Parent topic: Chapter 11 Ore Carriers

10.1 Intersection of continuous secondary and primary members

10.1.1 For vessels eligible for the notation Strengthened to carry cargoes which may liquefy (IMSBC Group A), the arrangement at the intersection of longitudinal stiffeners on the longitudinal bulkhead and hopper plate with transverse primary members are to comply with Pt 3, Ch 10, 5.2 Arrangements at intersections of continuous secondary and primary members and Table 10.5.1 Total load transmitted to connection of secondary members with Kc = 1,0.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.