Section 6 Inspection, workmanship and testing
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 4 Steel Unit Structures - Chapter 1 General - Section 6 Inspection, workmanship and testing

Section 6 Inspection, workmanship and testing

Parent topic: Chapter 1 General

6.1 General

6.1.1 Requirements regarding inspection, workmanship and testing are given in Pt 4, Ch 3, 6 Procedures for testing tanks and tight boundaries and Ch 13, 2 Specific requirements for ship hull structure and machinery of the Rules for Materials and should be complied with. For ship units, testing load heights are to be in accordance with Pt 10, Ch 2, 2.3 Local static loads.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.