Section 4 Material documentation for certified and classed lifting appliances
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Code for Lifting Appliances in a Marine Environment, July 2022 - Chapter 11 Materials and Fabrication - Section 4 Material documentation for certified and classed lifting appliances

Section 4 Material documentation for certified and classed lifting appliances

4.1 General

4.1.1 The designer/manufacturer of the lifting appliance shall have a system in place which enables all materials to be traced from purchasing to receipt at the manufacturer’s works and integrated into the construction of the lifting appliance. The Surveyors are to be given access for tracing the material when required.

4.1.2 Any deviation from the documentation requirements provided in the following shall be agreed with LR prior to any material being ordered for the actual project.

4.2 Material documentation for classed applications

4.2.1 The required documentation for the materials used in classed lifting appliances is specified in Table 13.3.1 Minimum requirements for the classification of lifting appliances. See also Ch 1, 1.6 Materials and fabrication.

4.3 Material documentation for certified applications

4.3.1 The required documentation for the materials used in certified lifting appliances is specified in Table 13.2.1 Minimum requirements for the certification of lifting appliances. See also Ch 1, 1.6 Materials and fabrication.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.