Section 3 Secondary member end connections
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Offshore Units, July 2022 - Part 4 Steel Unit Structures - Chapter 8 Welding and Structural Details - Section 3 Secondary member end connections

Section 3 Secondary member end connections

Parent topic: Chapter 8 Welding and Structural Details

3.1 General

3.1.1 For ship units, the design of secondary member end connections is to comply with Pt 10 Ship Units. For other unit types, the design of secondary member end connections is to comply with Pt 3, Ch 10, 3 Secondary member end connections of the Rules for Ships.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.