Section 6 References
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules for the Manufacture, Testing and Certification of Materials, July 2022 - Chapter 1 General Requirements - Section 6 References

Section 6 References

Parent topic: Chapter 1 General Requirements

6.1 General

6.1.1 The location of National and International Standards or Codes referenced in these Rules are shown in Table 1.6.1 List of National standards . The applicable National or International Standard or Code is the one adopted by the standards organization at the time of publication of these Rules unless the applicable version or edition is specified.

Table 1.6.1 List of National standards

Rule reference Standard
Chapter 1 – General Requirements ASTM A991/A991M
SNT-TC-1A
ISO 9712
  ISO/IEC 17020
  ISO 11666
  ISO 17636-1
  ISO 17636-2
  ISO 17638
  ACCP
  ISO 13588
  ISO 18563-1
  ISO 18563-2
  ISO 18563-3
  ISO 19285
  ISO 10863
  ISO 15626
  ASME V
  ISO 23277
  ISO 23278
  ISO 23279
  ISO 10675-1
  ISO 17640
  ISO 3452-1
  ASTM A991
Chapter 2 – Testing Procedures for Metallic Materials ISO 6892-1
ISO 6892-2
ISO 2566-1
  ISO 2566-2
ISO 148-1
  ISO 148-2
ISO 7500-1
ISO 6506-1
ISO 6506-2
ISO 6506-3
ISO 6507-1
ISO 6507-2
ISO 6507-3
ISO 8492
  ISO 8493
  ISO 8494
  ISO 8495
ASTM E23
  ASTM E208
  ASTM A770/A770M
  EN 10164
Chapter 3 – Rolled Steel Plates, Strip, Sections and Bars EN 10160
ASTM A578
ASTM E112
ASTM E381
ASTM A255
ISO 7452
ASTM A770/A770M
  ISO 643
  ASTM E45
  EN 10163-1
  EN 10163-2
  EN 10163-3
  EN 10164
  EN 10247
  ISO 6892-1
Chapter 4 – Steel Castings ISO 1161
  ASTM A991/A991M
  ISO 683-1
  ISO 683-2
  ISO 148-1
  ISO 4990
  ASTM E446
  ASTM E186
  ASTM E280
  ISO 4993
  EN 12680-1
  EN 12680-2
  EN 1371-1
Chapter 5 – Steel Forgings ASTM E112
  ASTM A991/A991M
  ASTM A745/A745M
  ISO 148-1
  EN 10228-4
  ANSI/ASNT CP 189
  ISO 9712
Chapter 8 – Aluminium Alloys ASTM G66
ASTM B928
Chapter 9 – Copper Alloys ASTM E272
Chapter 10 – Equipment for Mooring and Anchoring ISO 643
  ISO 1704
ISO 1834
ASTM E112
ASTM E381
ASTM A255
Chapter 11 – Approval of Welding Consumables ISO 3690
ISO 10042
ASTM G48
Chapter 12 – Welding Qualifications ISO 6947
ISO 5817
ISO 6520-1
ISO 6507-1
ISO 10042
ASTM G48
ISO 25239-3
ISO 25239-4
  ISO 14732
  ISO 148-1
Chapter 13 – Requirements for Welded Construction ISO 25239-3
  ISO 25239-4
  ISO 25239-5
ISO 6520-1
ISO 10042
  ISO 11666
  ISO 5817
  ISO 10675-2
  ISO 15626
Chapter 14 – Plastics Materials ISO 527-2
ISO 178
ISO 62
ISO 75-2
ISO 604
ISO 527-4
ISO 14125
ISO 14130
ISO 1172
ISO 1922
ASTM C273/C273M
ASTM C393/C393M
ISO 845
ASTM C297/C297M
ISO 844
ISO 180
ASTM D2583
  BS 1088
ISO 175
EN 59
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.