5.1.3 When
                                 nets or control wires are in contact with the ship's side, such as
                                 below the gallows in a side trawler, the side shell plating is to
                                 be increased by 40 per cent.
                              
                              
                              
                            
                           
                           
                           
                              
                              
                              5.1.4 Where
                                 a bar keel is fitted, the breadth of the garboard strake is to be
                                 not less than 760 mm, and the thickness is to be 10 per cent greater
                                 than the bottom shell.
                              
                              
                              
                            
                           
                           
                           
                              
                              
                              5.1.5 The
                                 thickness of the bottom shell plating is to be increased by 10 per
                                 cent where intercostal girders are not fitted.
                              
                              
                              
                            
                           
                           
                           
                           
                           
                           
                              
                              
                              5.1.7 Cope
                                 irons are to be fitted under gallows or any other area where excessive
                                 wear could occur.