Lloyd's Register Rules and Regulations - Rules and Regulations for the Classification of Ships, July 2022 - Part 4 Ship Structures (Ship Types) - Chapter 6 Trawlers and Fishing Vessels - Section 9 Strengthening of bottom forward
Section 9 Strengthening of bottom forward
9.1 General
9.1.1 The requirements of Pt 3, Ch 5, 1 General are to be applied except when the forward draught contemplated for any sea-going condition is equal to or greater than 0,03L in which case the bottom shell plating in the region to be strengthened may be taken as:
where the symbols are as defined in Table 5.1.1 Additional strengthening of bottom forward in Pt 4, Ch 5 Barges and Pontoons.
This thickness derivation may be adopted for both longitudinal and transverse framing.
| Copyright 2022 Lloyd's Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |